Description
Find more at gorillaglue.comGrabs virtually anything instantly*Holds instantly*All surface* - all purpose*Heavy objects may require support. Not recommended for use on polypropylene (PP), polyethylene (PE), bitumen or non-stick surfaces.Gorilla Heavy Duty Grab Adhesive is the all-purpose way to hold building materials. It's so versatile, it grabs virtually anything instantly. Use it indoors or out, even underwater, for an ultra-high strength bond that lasts.
Gorilla Grab Adhesive is a flexible, gap filling formula which holds in an instant and can be used both indoors and out to provide a long-lasting, heavy duty bond to virtually anything.
©2022 Gorilla Glue Europe Ltd.
Incredibly StrongEasy to UseHeavy DutyFor the toughest jobs on planet earthUltra-high strength100% waterproof
Pack size: 200ML
Net Contents
200ml
Preparation and Usage
DirectionsAll surfaces should be clean, dry and free of dirt, grease, oil and old adhesive. Remove cap and foil seal from tube before first use.1 Squeeze adhesive onto one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.2 Within 10 minutes of application, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening. Full cure achieved in 24 hours.3 Remove any excess adhesive immediately with a dry cloth. White spirit may be used according to manufacturer's instructions.Remove excess adhesive with a dry cloth and replace cap tightly to prevent adhesive from curing.Grab adhesive is paintable for up to 30 minutes after application and will fully cure in 24 hours; this may take longer in lower temperatures or humidity and/or when bonding non-porous surfaces. For best results when painting, apply paint within 30 minutes of applying adhesive. Apply paint with reduced brush/roller pressure to avoid disturbing adhesive.Service temperature: -40°C to 93°C.
